Parkside PMH 1 A1 Montage-Und Sicherheitshinweise Seite 9

Be sure to place the product on solid, even sur-
face providing a solid footing. Check the stability
before use.
Protect the product from strong wind and
storms. Place the product in a place that is shel-
tered from the wind.
Do not put pressure onto the product and ensure
even weight distributed on the shelves. The prod-
uct may otherwise be overbalanced and tip.
CAUTION! Lock the wheel with stopper
when you do not move the raised bed unlock
the stopper
when move the raised bed (Fig.
8
F).
Take care not to exceed the maximum
weight of 10 kg per layer or 20 kg
10 kg
in total, otherwise this may result in
a risk of injury or damage to the product.
Assembly
We recommended that two person to assembly
the product together in order to avoid injuries or
damage to people or the product.
Connecting Back panel
and Left panel with screw
6
Figure A.
Install the front panel
2
with screw according to Figure B.
11
Turn the raised bed bottom side upward, and
install the wheels ,
7 8
Wheel with stopper
8
Wheel without stopper
side.
Turn the raised bed and top side upward (Fig. D).
There are 3 layer in the raised bed with 4 wide
slat and 1 narrow slat
4
could adjust the slat arrangement according to
actual use. For example shown in Figure D, place,
1wide slat + 1 narrow slat
4
and 3 wide slat at the bottom layer.
4
CAUTION! Narrow slat
with wide slat to meet the 10 kg loading
4
per layer.
When slat , in placed on top layer, user
3 4
can insert the liner on the top of the raised
9
bed. Figure E.
8
, Right panel
1 5
according to
11
to the assembled part
according to Figure C.
install on the front side.
install on the back
7
provided. User
3
on top layer
3
need to pair up
3
Clean and care
For raised bed
Allow all parts to dry well before packing up the
product. This will prevent mold, odors and dis-
coloration.
Use a moist, lint-free cloth to clean and care for
the product.
For liner
9
Use a moist, lint-free cloth to clean and care for
the product.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: owim@lidl.ie
GB/IE 9