Service; Importer; Disposal - Parkside PAMFW 12 C3 Originalbetriebsanleitung

WARNING!
► Have the power tool repaired by the
Service centre or a qualified electrician
and only using genuine replacement parts.
This will ensure that the safety of the appli-
ance is maintained .
► Always ensure that the power plug or the
mains cable is replaced only by the manu-
facturer of the appliance or by an
approved customer service provider. This
will ensure that the safety of the appliance is
maintained .

Service

Service Great Britain
Tel .: 0800 404 7657
E-Mail: kompernass@lidl .co .uk
Service Ireland
Tel .: 1890 930 034
(0,08 EUR/Min ., (peak))
(0,06 EUR/Min ., (off peak))
E-Mail: kompernass@lidl .ie
IAN 351898_2007

Importer

Please note that the following address is not the
service address . Please use the service address
provided in the operating instructions .
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www .kompernass .com
■ 12 │ GB │ IE

Disposal

The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant .
Do not dispose of power tools
in your normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools be
collected separately and recycled in an environ-
mentally compatible manner .
Do not dispose of batteries in
your normal household waste!
Defective or worn-out rechargeable
batteries must be recycled according to
Directive 2006/66/EC . Take the battery pack
and/or appliance to a nearby collection facility .
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The pack-
aging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
PAMFW 12 C3