1 Multi-Room Mode; 1 1 Multi-Room Settings Via The App; 1 2 Multi-Room Settings At The Unit; Specifications - Monacor WAP-202 Bedienungsanleitung

or (depending on the app version) to
be found in the upper bar of the screen
5) To return to the overview, tap the arrow
in the upper bar of the screen

5.1 Multi-room mode

If there are multiple units WAP-202 in the
network, a multi-room system can be estab-
lished In a multi-room system, units can be
combined as groups for synchronous replay
of the same audio material The replay source
is defined by the master (server) of the group
and will be adopted by the other units of the
group (clients) A group can include up to 5
units (1 server and a maximum of 4 clients)
Notes:
1 Each unit can only be included in one group (either
as a server or as a client)
2 To make sure that the server / client assignment
currently defined will remain saved, never switch
off the server of the group by means of the switch
POWER
5.1.1 Multi-room settings via the app
Note: The icons may vary according to the app ver-
sion used
1) To create a group: In the overview, multi-
room enabled units are indicated by the
icon after their name To select the
unit to be used as the server of the group,
tap the corresponding icon A window for
group creation will appear The units avail-
able in the network are shown; to add a
unit as a client to the group, tap the field
next to its name (check mark in field) If
required, assign a user-defined name to
the group Tap "OK" to confirm the crea-
tion of the group The group will then be
shown in the overview
2) To edit a group: Tap the icon
group name and then edit the group as
desired: To add a unit to the group or to
remove it, tap the field next to its name;
a group can be renamed or removed
(= dissolved)
3) To operate a group: Tap the group name:
The control page for the group will be
opened A group can be operated like a
single unit, the only difference being that
the source is only selected for the server
By means of a slider, the volume for
all group members can be adjusted at the
same time To mute the group, tap the
speaker icon to the left of the slider To
make settings separately for individual
group members, click the multi-speaker
icon to the right of the slider; a new page
will be opened where you can mute indi-
vidual group members and adjust their vol-
ume In addition, it is also possible to make
individual equalizer settings separately (tap
the corresponding equalizer icon)
26
5.1.2 Multi-room settings at the unit
The multi-room mode can also be used with-
out the app UNDOK In the menu "System
settings" (chapter 3 4), under
the following setting / display options are
available:
Multi­room
View details
Create new g roup
Add to g roup
List current clients
Leave g roup
–
View details
unit (not grouped, server, client) and, if the
unit is member of a group, the name of
the group
–
Create new g roup
with the unit as the server
A menu will appear; enter and confirm the
desired name of the group (operation of
the input menu:
Then the unit will show a list of the units
available Select the client desired from
the list and then press the knob CONTROL
SELECT to confirm A client added to the
group will be marked by an asterisk
you do not want to add further clients,
press the button BACK to exit the menu
–
Add to g roup
this menu item can be used to add further
clients to the existing group (procedure as
described above)
–
List current clients
the group, this menu item can be used to
show the clients of the group; to remove
a selected client from the group, press the
knob CONTROL SELECT If you do not want
to remove any more clients, press the but-
ton BACK to exit the menu
– : If the unit is a client within
Leave g roup
after the
a group, this menu item can be used to
remove the unit from the group
– Dissolve g roup
within the group, this menu item can be
used to dissolve the group
If control via the network does not work, check
the following items:
– Make sure that the unit has not been switched
off by means of the switch POWER
– Make sure that
Keep network connected
of the setup wizard or by means of the cor-
responding menu item in the menu "System
settings") The unit will maintain the connection
to the network, even in the standby mode
– Make sure that the smartphone/tablet and all
units to be controlled are connected to the same
network
– Make sure that the router allows communication
between wireless LAN units within the network
If it does not, activate the corresponding setting
of the router (for some routers to be found via
"WLAN"  "Security" for example)
Multi­room ,
>
>
>
>
>
Fig. 52
: To view the status of the
: To create a new group
chapter 3 3, fig 17)
☞
* If
: At the server of the group,
: At the server of
: If the unit is the server
has been selected for
YES
(can be set by means

6 Specifications

Reception frequencies
FM: 87 5 – 108 MHz
DAB(+): 174 928 MHz to
239 200 MHz
Audio input AUX: 1 2 V, 3 5 mm jack
Outputs
Line: 750 mV, RCA
Headphones: 1 V, 3 5 mm jack
Audio formats
supported: MP3, AAC(+),
WMA, WAV, FLAC
Menu languages: 13
( ☞ chapter 3 4 1)
Power supply
Mains voltage: 230 V/ 50 Hz
Power consumption: 20 VA max
DC power supply
⎓ 15 V, 300 mA
(alternative):
Battery for
remote control: 3 V, 1 x CR 2025
Dimensions: 482 × 44 × 245 mm
(W × H × D)
Rack spaces: 1 RS
Weight: 2 7 kg
Subject to technical modification
All rights reserved by MONACOR
GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means
for any commercial use.
INTERNATIONAL
®