Before You Start; Inserting / Replacing The Battery - Parkside PDM 300 C2 Bedienungsanleitung Und Sicherheitshinweise

6. Before you start

Remove the multimeter and the accessories from the packaging.
Check the multimeter and the accessories for damage. If the multimeter is
damaged, do not use it.

6.1 Inserting / replacing the battery

The multimeter is powered by a 9 V block battery. The procedure for inserting or
replacing the battery is as follows:
WARNING! Switch the multimeter off and remove all measurement
cables before opening it!
CAUTION! If the battery is empty, the
[1]. The battery should be replaced as soon as possible to ensure proper
functioning.
• Use the screwdriver provided to undo the top screw on the back of the
multimeter and remove the battery compartment cover by sliding it upwards.
PARKSIDE PDM 300 C2
symbol appears on the display
English - 31