Setting Audio, Subtitle And Teletext Language; Using Software Update; Using Auto Update; Setting Update Time - Pioneer PDP-505XDE Dtv-Bedienungsanleitung

01 Enjoying DTV broadcasts
Setting Audio, Subtitle and Teletext
Language
You can select the available default audio, subtitle, and
teletext languages displayed on screen.
1
Repeat steps 1 to 4 provided for Setting Digital Audio.
2
Select "Language Setting" ( /
3
Select "Primary Audio", "Secondary Audio", "Primary
Subtitle", "Secondary Subtitle" or "Teletext" ( / ).
4
Select a language ( / ).
• The System automatically selects the language based on
the "Country" setting (page 28 in the operating instructions)
when the selected language for audio, subtitle, or teletext is
not available.

Using Software Update

This function downloads and updates the system's software
as specified.

Using Auto Update

When set to "On", Auto Update allows you to upgrade to the
latest software version and add new channels when they
become available.
1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "DTV Setup" ( /
4
Select "Software Update" ( /
5
Select "Auto Update" ( / ).
6
Select "On" ( / ).
Software Update
Auto Update
Set Update Time
Start Manual Update
Technical Information
8
En
Downloaded from www.Manualslib.com
then ENTER).
then ENTER).
then ENTER).
then ENTER).
On
manuals search engine
• We recommend that you normally select "On".
• For Auto Update to start, there must be more than 1 hour
left to the start of the next preset recording/watching.
• 60 seconds before the scheduled update, a message
prompt appears asking if you want to carry out Auto Update
or not. Auto Update automatically starts if "OK" is selected
or no selection is made after 50 seconds.
• To quit an update in progress, press HOME MENU.

Setting Update Time

You can set the time your Plasma Display System performs
Auto Update each day. To use this function, set "Auto Update"
to "On" first.
1
Repeat steps 1 to 4 provided for Using Auto Update.
2
Select "Set Update Time" ( /
3
Set a time for Auto Update ( / ,
Set Update Time
Time
:
11 32

Starting Manual Update

This allows you to manually execute Software Update. If less
than 1 hour is left to the next scheduled Auto Update or
programmed recording/watching, Manual Update cannot be
executed.
1
Repeat steps 1 to 4 provided for Using Auto Update.
2
Select "Start Manual Update" ( /
• For Manual Update to start, there must be more than 1
hour left to the start of the next preset recording/watching.
• For Manual Update to start, there must be more than 1
hour left to the start of Auto Update.
then ENTER).
/ or 0 – 9).
then ENTER).