Parts; Before First Use; Inserting/Removing The Batteries - Ideen Welt W240 Bedienungsanleitung

This device is intended for private use and must not be used for commercial purposes.
Dispose of the packaging materials in an appropriate way. Contact your local
authorities about collecting points or waste separation.
The normal functioning of the thermometer could be influenced by strong
electromagnetic disturbances (e.g. by using a microwave near the thermometer).
Should such a disturbance occur, set the thermometer back to its default settings by
removing the batteries and inserting them again after approx. 1 minute (see Inserting
and removing the batteries). Should disturbances occur again, place the thermometer in
another location.

3. PARTS

front

4. BEFORE FIRST USE

Clean the thermometer as described in Cleaning and Maintenance. When doing so, also follow
the Safety Instructions.

5. INSERTING/REMOVING THE BATTERIES

1. The thermometer requires one 1.5 V, R3/LR3/AAA battery for operation.
2. Open the battery compartment on the back of the device by unlocking the battery
compartment cover.
3. Place a 1.5 V, R3/LR3/AAA battery into the compartment, paying attention to the correct
polarity as indicated on the battery compartment itself. The thermometer will now make 3
warning signals, after which the display will go on.
4. The thermometer is now ready for use.
5. To close the battery compartment, put the cover back on and click it into place.
Downloaded from www.Manualslib.com
Danger of suffocation! Keep all packaging material away from children.
top
back
manuals search engine
A. Snooze button
B. Min/MAX button
C. Mode button
D. Alarm button
E. Set button ((o))
F. °C/°F button
G. Battery compartment
H. Stand
Not shown: Sensor with cable
7