Herunterladen Inhalt Inhalt Diese Seite drucken

Temperature Trend Display; Ice Alarm; Cleaning And Maintenance - Ideen Welt W240 Bedienungsanleitung

Innen- und außen-thermometer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
ALARM (D)
SNOOZE (A)
7.2 BACK OF THE THERMOMETER
BUTTON
SET ((o)) (E)
°C/°F
STAND (H)

8. TEMPERATURE TREND DISPLAY

Next to the temperature, a straight, increasing or decreasing arrow will be displayed to indicate
whether the temperature is staying constant, increasing or decreasing. The temperature is
considered to be constant if it does not increase or decrease by more than 1 °C (or 2°F) within
an hour.
Deleting the minimum or maximum temperature will also reset the temperature
increase/decrease indicator.

9. ICE ALARM

Activate the ice alarm by pressing the °C/°F button (F) for 2 seconds. A snow icon appears
next to the outdoor temperature display. When the ice-warning function is activated, a warning
signal will sound for 30 seconds and a snow icon will blink if the temperature moves anywhere
between -1°C and +4°C, to warn that it may be icy. If the temperature rises over +4°C again,
then the snow icon stops blinking.

10. CLEANING AND MAINTENANCE

Downloaded from
www.Manualslib.com
Simple operation:
In time mode, press ALARM (D) and the preset alarm time will be displayed.
After 30 seconds, the current time will be displayed again, or you can press
MODE (C).
Long confirmation necessary (press for longer than 2 seconds:
Mode for setting the alarm function.
Press the SET button (E) to increase the hour.
Confirm the hour setting with the ALARM (D) button.
Press the SET button (E) to increase the minutes.
Confirm the minute setting with the ALARM (D) button.
You will then leave the set mode.
In the activated Snooze mode (recognisable by the "Zz" symbol next to the
time), the alarm will be disabled for 8 minutes by pressing the SNOOZE button
(A) (recognisable by the blinking "Zz" symbol). To completely disable the
alarm, press any other button.
FUNCTION:
Simple operation in time mode: Switch between seconds and day display.
Simple operation: Switch between the temperature display in degrees Celsius
or degrees Fahrenheit.
Long confirmation necessary in time mode (press for longer than 2 seconds):
Turning the ice warning function on and off:
To stand up the thermometer, fold out the stand (H).
Warning! Before cleaning, always remove the batteries from the battery
compartment.
Warning! Do not under any circumstance use alcohol, acetone, petrol,
aggressive cleansers, etc. for cleaning purposes. In addition, do not use hard
brushes or metal objects for cleaning purposes.
manuals search engine
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis