Welding Mask-Specific Safety Instructions - Parkside PMSG 200 A1 Montage-, Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Safety instructions
bare hands. Do not wear wet or
damaged gloves. Protect yourself
from electric shock with insulation
against the workpiece. Do not
open the device housing.
Danger from welding
fumes:
Inhalation of welding fumes can
endanger health. Do not keep
your head in the fumes. Use the
equipment in open areas. Use
extractors to remove the fumes.
Danger from welding
sparks:
Welding sparks can cause an
explosion or fire. Keep flammable
substances away from the weld-
ing location. Do not weld next to
flammable substances. Welding
sparks can cause fires. Keep a
fire extinguisher close by and
an observer should be present
to be able to use it immediately.
Do not weld on drums or any
other closed containers.
Danger from arc beams:
Arc beams can damage your
eyes and injure your skin. Wear
a hat and safety goggles. Wear
hearing protection and high,
closed shirt collars. Wear welding
safety helmets and make sure you
70
GB/MT
use the appropriate filter setting.
Wear complete body protection.
Danger from electro-
magnetic fields:
Welding current generates elec-
tromagnetic fields. Do not use
if you have a medical implant.
Never wrap the welding cable
around your body. Guide
welding cables together.
z Welding mask-specific
safety instructions
With the help of a bright light
„
source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any welding work.
Weld spatters can damage
„
the welding lens. Immediately
replace damaged or scratched
welding lenses.
Immediately replace damaged
„
or highly contaminated or
splattered components.
The device must only be oper-
„
ated by people over the age
of 16.
Please familiarise yourself with
„
the welding safety instructions.
Also refer to the safety instruc-
tions of your welding device.