ABB i-bus KNX Produkthandbuch Seite 42

®

i-bus KNX EG/A 32.2.1
Control _ Temperature RC
Control _ Setpoint Inverse
Control _ Valve Setpoint
Status_ Control Variable
Status_ Fan Stage
Status_ Fan Man/Auto
Status_ Setpoint Shift
Status_ Controller Mode Off/Auto
Temperatur-
Controller
Status_ Controller Mode Cool/Heat
Status_ Controller Mode
Status_ Normal/Hold-off Stop
Status_ Room Occupancy Frost
Status_ Room Occupancy
Status_ Room Occupancy Mode
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607  +49 (0) 6221 701 724
2 bytes DPT_Value_Temp
1 bit DPT_Bool
1 byte DPT_Scaling
1 byte DPT_Scaling
1 byte DPT_Scaling
1 bit DPT_Bool
2 bytes DPT_Value_Tempd
1 bit DPT_Bool
1 bit DPT_Heat/Cool
1 byte DPT_HVACContrMode
1 bit DPT_Bool
1 bit DPT_Bool
1 bit DPT_Occupancy
1 byte DPT_OccMode
9.001 R T ºC
1.002 R T 0 – False; 1 - True
5.001 R T %
5.001 R T %
5.001 R T %
1.002 R T 0 – Man; 1 – Auto
9.002 R T ºK
1.002 R T 0 – Off; 1 - Auto
1.100 R T 0 – Cooling; 1 – Heating
20.105 R T 1 - Heat; 3 - Cool; 6 - Off
1.002 R T 0 – Normal; 1 – Hold-off
1.002 R T 0 – False; 1 - True
1.018 R T 0 – Not occupied; 1 – Occupied
20.003 R T HVAC Control Mode
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
Benutzerhandbuch r1.4 de
41 / 50