Safety Guidelines For Battery Chargers; Before Use; Charging The Battery Pack (See Fig. A); Inserting/Removing The Battery Pack - Parkside PABS 20-Li D5 Betriebsanleitung

Safety guidelines for battery
chargers
This tool may be used by children
■
aged 8 years and above and by
persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to
use the tool safely and are aware
of the potential risks. Do not allow
children to use the tool as a toy.
Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
To avoid potential risks, if the appli-
■
ance power cable is damaged, it
must be replaced by the manufac-
turer, its customer service or by a
qualified technician.
The charger is suitable
for indoor use only.
WARNING!
■ To avoid potential risks, if the appliance
power cable is damaged, it must be replaced
by the manufacturer, its customer service or
by a qualified technician.
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3.
♦ A current list of battery compatibility can be
found at www.Lidl.de/Akku.
PABS 20-Li D5

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always disconnect the mains plug before
removing the battery pack
inserting it into the charger.
NOTE
► Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C.
If a lithium-ion battery is going to be stored
for an extended period, the charge level
should be checked regularly. The optimum
charge level is between 50% and 80%. The
storage climate should be cool and dry and
the ambient temperature should be between
0°C and 50°C.
♦ Insert the battery pack
charger (see fig. A).
♦ Insert the mains plug into the mains power
socket. The control LED
indicate that charging is in progress.
♦ The green control LED
charging is complete and the battery pack
ready for use.
♦ Push the battery pack
ance.
Inserting/removing the battery
pack
Inserting the battery pack
♦ Set the rotation direction switch
position (lock). Snap the battery pack
the handle.
Removing the battery pack
♦ Press the release button
battery pack .
from or
into the high-speed
lights up red to
indicates that
is
back into the appli-
to the middle
into
and remove the
GB │ IE │
21 ■