Inhaltsverzeichnis
Werbung
Maintenance
HT-SB350(W)
HT-SB350(BK)
ENGLISH
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.).
It may damage the cabinet finish.
Do not apply oil to the inside of each component. It may
cause malfunctions.
E-19
HT-SB350_A6_EN_UK.fm
Downloaded from
www.Manualslib.com
2010 August 16
manuals search engine
Error indicators and warnings
When you fail to perform operations properly, the following
messages are displayed on the unit.
Display
or
or
or
(Display blinks continuously)
Power indicator
(blinks red)
(*): Should the same message appear even if the unit is unplugged
and plugged in or is set to the stand-by mode and on again, contact
your local dealer where you purchased the unit.
Meaning
Malfunction of the surround
circuit. Place the unit away from
noise source and plug the AC
power lead into another AC
outlet. (*)
When there is no input signal.
Play back the connected
equipment.
Nonstandard signal. Cannot be
recognized.
Signals other than DOLBY
DIGITAL, DTS, Linear PCM
cannot be recognized.
Poor connection of the digital
audio input terminal.
Turn off the unit and check if the
cable is connected properly.
When the protection circuit is
activated.
Werbung
Inhaltsverzeichnis
