Herunterladen Inhalt Inhalt Diese Seite drucken

Parkside PDRP 6.2 B2 Originalbetriebsanleitung Seite 8

Druckluft-reinigungspistole
Vorschau ausblenden Andere Handbücher für PDRP 6.2 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Check all connections and supply lines .
All maintenance devices, couplings and hoses
must correspond to the appliance parameters
in terms of pressure and air flow . Insufficient
pressure will adversely affect the function of
the compressed air cleaning gun; excessively
high pressure can cause property damage and
personal injury .
Protect the hoses against kinking, constriction,
solvents and sharp edges . Keep hoses away
from heat, oil and rotating parts .
Ensure that the hose clamps are always tight-
ened firmly . Loose or damaged hose clamps
can allow air to escape in an uncontrolled
manner .
Replace a damaged hose immediately .
A defective supply line can cause a compressed
air hose to thrash about and cause personal
injury .
If the connection line of the compressed air
cleaning gun is damaged, it must be replaced
by the manufacturer or its customer service or
a similarly qualified person in order to avoid
hazards .
Do not use the compressed air cleaning gun if
you are tired or under the influence of drugs,
alcohol or medication . A moment of inattention
while operating the appliance may result in
serious personal injury .
CAUTION!
BE CAREFUL WHEN PUTTING DOWN THE
TOOL!
Always put down the compressed air cleaning
gun in such a way that it does not lie on the
trigger . Under certain circumstances, this could
cause an accidental activation of the com-
pressed air cleaning gun which, in turn, could
lead to hazards .
Use only filtered and regulated compressed
air . Dust, caustic fumes and/or moisture can
damage the motor of a compressed air tool .
PDRP 6.2 B2
The compressed air cleaning gun and the
supply hose must be fitted with a hose coupling
that allows the pressure to be relieved completely
when the coupling hose is disconnected .
DANGER!
Avoid contact with live cables . The compressed
air cleaning gun is not insulated against electric
shock .
RISK OF INJURY!
Under certain circumstances, high working
pressures can cause kickback to occur . This
can cause hazards due to the continuous
loading .
If you lack experience in using the compressed
air cleaning gun, seek training in how to use it
safely .
DANGER!
Keep your hands or other limbs away from
the rotating parts . This can lead to a risk of
serious injury!
RISK OF PUNCTURE WOUNDS!
Do not treat a penetration injury in the same
way as a normal cut . A high-pressure jet can
inject toxins into the body and cause serious
injuries .
In the event of a chemical penetration of the
skin, seek medical assistance immediately .
The compressed air cleaning gun may not be
modified in any way without the manufacturer's
consent .
The compressed air cleaning gun tool must
always be disconnected from the air supply
after use and for as long as it is not in use .
If the compressed air cleaning gun is not airtight
or needs to be repaired, it must not be used .
GB │ CY
 5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis