Appliance-Specific Safety Instructions For Power Planers; Original Accessories/Auxiliary Equipment - Parkside PEH 30 C3 Betriebsanleitung

Appliance-specific safety instructions
for power planers
■ Wait until the cutter block comes to a
complete standstill before putting down the
power tool. An exposed, rotating cutter block
can catch in the surface and cause a loss of
control which could result in serious injuries .
■ Hold the power tool by the insulated handles
as the cutter block can come into contact with
its own power cable. Contact with a live wire
may make exposed metal parts of the power
tool live and could give the operator an electric
shock .
■ Fix and secure the workpiece to a sturdy
work surface using clamps or other methods.
If you hold the workpiece in your hands or
against your body only it will remain unstable,
and this can result in loss of control .
■ Do not insert your fingers into the chip
ejector . You can injure yourself on rotating
parts!
■ Always switch the appliance on before
applying it to the workpiece. Otherwise, there
is a risk of kickback if the planing blade catches
in the workpiece .
■ The plane sole
piece when working. Otherwise, there is a risk
of injury due to the plane jamming .
■ Never plane over metal objects. The planing
blade/cutter block
■ Materials containing asbestos may not be
processed. Asbestos is a known carcinogen .
■ 6 │ GB │ IE │ NI │ CY
must lie flat on the work-
could be damaged .
■ Dusts can be produced while working that
are hazardous to health, inflammable or
explosive. Wear a dust mask and use a suit-
able dust/chip extractor . Some dusts are carci-
nogenic .
■ When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance. Do not
use the power planer if the battery is
damaged. Damaged cables increase the risk of
electric shock .
■ Do not rest your hands next to or in front of
the appliance and the area being worked.
Otherwise, there is a risk of injury if you slip .
■ In case of danger, remove the plug from the
socket immediately.
■ Always remove the plug from the power socket
in event of danger, during work breaks, when
working on the appliance (e.g. when changing
planing blade).
■ Always route the power cord towards the
rear, away from the appliance.
■ Use only sharp planing blades.
■ Do not soak the materials or the area to be
worked with liquids containing solvents.
■ Avoid all contact with rotating parts.
■
Never use the appliance for other purposes
and only with original parts/accessories.
■ Hold the appliance firmly while working.
Ensure that your stance is secure and stable .
■ The appliance must always be kept clean,
dry and free from oil and grease.
Original accessories/auxiliary
equipment
■ Use only the auxiliary equipment and acces-
sories specified in the operating instructions.
Using parts or accessories other than those
recommended in the operating instructions can
lead to a risk of injury .
PEH 30 C3