Panasonic EY75A1 Bedienungsanleitung Seite 18

EY75A2 18 V
M8, M10 x 35 mm. M12 x 45 mm
N m
(kgf-cm)
196.0
（2000）
147.0
（1500）
98.0
（1000）
M10
49.0
（500）
M8
0.0 0.5 1.0
Tightening time (Sec.)
Bolt
Nut
Tightening conditions
• The following bolts are used.
Standard bolts: Strength type 4.8
High tensile type 12.9
Explanation of the strength type
4.8
Bolt yield point
80
( % of tensile strength)
32 kgf/mm
Bolt tensile strength
40 kgf/mm
VI. ACCESSORIES
Use only suitable size of bit.
Panasonic original Optional Quick change chuck (EY9HX110E).
Chuck Size: 6.35 mm hex
VII. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model
Wood screw
Screw driving
Self-drilling screw
Bolt fastening
EY7546_EY7547_EY7550_EY7551_EU_001(EN).indd 18 EY7546_EY7547_EY7550_EY7551_EU_001(EN).indd 18
High tensile bolt
M12
1.5 2.0 2.5 3.0
Washer
Steel plate
thickness 10 mm
Washer
Spring washer
2 (45000 psi)
2 (56000 psi)
- 18 -
2) Tightening time
Longer tightening time results in increased
tightening torque. Excessive tightening,
how ever, adds no value and reduces the
life of the tool.
3) Different bolt diameters
The size of the bolt diameter affects the
tight ening torque.
Generally, as the bolt diameter increases,
tightening torque rises.
4) Tightening conditions
Tightening torque will vary, even with the
same bolt, according to grade, length, and
torque coefficient (the fixed coefficient indi-
cated by the manufacturer upon produc-
tion).
Tightening torque will vary, even with
the same bolting material (e.g. steel),
accord ing to the surface finish.
Torque is greatly reduced when the bolt
and nut start turning together.
5) Socket play
Torque is lowered as the six-sided
configu ration of the socket of the wrong
size is used to tighten a bolt.
6) Switch (Variable speed control trigger)
Torque is lowered if the unit is used with
the switch not fully depressed.
7) Effect of Connecting Adaptor
The tightening torque will be lowered
through the use of a universal joint or a
connecting adaptor.
EY75A1
3.5 mm - 9.5 mm
3.5 mm - 6 mm
Standard bolt : M6 - M16
High tensile bolt : M6 - M12
EY75A2
2012-10-11 16:40:48 2012-10-11 16:40:48