Ape Labs APE FORCE ONE Bedienungsanleitung Seite 14

ape labs apeforceone user manual
14
Downloaded from www.Manualslib.com
GENERAL SETTINGS
TRANSMIT MODE
1. SEND ON MODIFY:
2. SEND ON ENTER:
SEND TO TYPE:
SEND TO S/N:
AUTO SETTINGS
PROGRAM:
INTENSITY:
SPEED:
FADE:
DIRECTION:
USER COLORS:
STROBOSCOPE:
INFO
FIRMWARE VERSION: Firmware version
RF LINK:
FACTORY RESET
If you are confused about your settings, you can perform a factory reset.
No programs or the like will be deleted, only your personal settings.
manuals search engine
transmits changed values immediately
transmits changed values after pushing the
„SEND" button
Set of receiving unit by choosing the lamp type
(mobilight, apestick, etc.)
Set of receiving unit by choosing the serial number
Select pre-set programs (20)
Adjust brightness (0 % - 100 %)
Set speed of program (90 ms - 9.21 min)
Set fade time in programs (0% - 100%)
Set program direction (forward, backward, repeat)
Setting colors used in programs.
Push the "BRIGHTNES" button for 2 seconds
and set your strobe value.
type of frequency band