Ape Labs APE FORCE ONE Bedienungsanleitung Seite 13

BLUE SETUP
REMOTE-ACTIVATE:
REMOTE-DEACTIVATE/
NC INPUT SELECT:
DMX ADDRESS:
CHANNELS:
DMX TAB:
STROBE:
DMX FAILURE:
USE WHITE LEDS:
LED POWER:
WHITE CORRECTION: Turn color correction adjustment on/off
WHITE CALIB RED:
WHITE CALIB GREEN: Adjust color correction – applies to all colors or
WHITE CALIB BLUE:
AC FAILURE:
CHAIN SIZE :
POS IN CHAIN:
SET PIX SIZE:
SET START PIX:
NUMBER OF SET:
REMOTE GROUP:
Downloaded from www.Manualslib.com
NC
Setting source of receiving per radio transmission
Setting of DMX address per radio transmission
Depends on ape labs product
Select DMX mode (RGBWS, EFFECT MODE FIX,
EFFECT MODE RGBW)
Turn strobe channel on/off in RGBWS DMX mode
What to do if there is no DMX signal?
The white LEDs are activated by an RGB mixed
color (saves battery life)
Increase battery life by dimming the LEDs
Adjust color correction – applies to all colors or
programs
programs
Adjust color correction – applies to all colors or
programs
What to do if there is no power?
(ape lamp operated by charging adapter )
Size of lamps- chain (up to 32 units)
Position of lamp in chain – (from left to right)
Setting of pixelsize (while using programs)
Setting of startpixel (while using programs)
NC
Assigning of the group (1-4) per radio transmission
manuals search engine
ape labs apeforceone user manual
13