Canon FU-1000 Handbuch Seite 19

O
P
4
5
ON ON
TALLY LIGHT
6
Adjust the viewfinder
display.
Adjust the brightness (B), contrast
(C) and peaking (P) of the
viewfinder display ( o ).
¡ Brightness
Serves as a guide when
manually setting the aperature.
Adjust using a gray scale or
other subject with differing
contrast levels.
¡ Peaking
Use to sharpen the display when
focusing.
• The brightness, contrast and
peaking levels you set will not
effect the recorded image.
Tally lamp
To have the tally lamp blink while
recording, turn the tally lamp on
through the XL1S's menu and turn
on the TALLY switch on the
FU-1000 ( P ). Both must be set to
on in order for the tally lamp to
blink.
Lens illumination lamp
Illuminates the lens, allowing you to
make adjustments in dark recording
situations. Turn on/off with the
LIGHT switch ( P ).
19