Herunterladen Inhalt Inhalt Diese Seite drucken

After Use; Cleaning And Care - Parkside PFMR 1600 B2 Bedienungs- Und Sicherheitshinweise

Farb- und mörtelrührer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
˜ After use
1 .
Switch the product off . Disconnect the
product from the mains and let it cool down .
2 .
Check, clean and store the product as
described below .
˜ Cleaning and care
m
WARNING!
Always switch the product off,
disconnect it from the mains and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜ Cleaning
The product must always be kept clean, dry
¾
and free from oil or grease . Remove debris
from it after each use and before storage .
Regular and proper cleaning will help ensure
¾
safe use and prolong the life of the product .
Inspect the product before each use for worn
¾
and damaged parts . Do not operate it if you
find broken and worn parts .
Never allow fluids to get into the product .
¾
Clean the product with a dry cloth . Use a
¾
brush for areas that are hard to reach .
In particular clean the air vents after every
¾
use with a cloth and brush .
Remove stubborn dirt with high pressure air
¾
(max . 3 bar) .
Remove the universal stirrer 4 from the
¾
agitator shaft 3 (Fig . C, D) . Clean the
universal stirrer with water .
30 GB/IE
Dry the universal stirrer 4 after cleaning
¾
and spray a little anti-rust oil onto them
before storage .
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜ Maintenance
Before and after each use, check the product
and accessories (or attachments) for wear and
damage . If required, exchange them for new ones
as described in this instruction manual . Observe
the technical requirements (see "Technical data") .
˜ Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
˜ Storage
Switch the product off and disconnect it from
¾
the mains .
Clean the product as described above .
¾
Store the product and its accessories in a
¾
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
¾
inaccessible to children . The ideal storage
temperature is between 10 °C and 30 °C .

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis