Additional Safety Instructions - Parkside PRT 550 A3 Originalbetriebsanleitung

GB IE
- after touching a foreign body in
order to check the machine for
damage.
- for an immediate check if the
machine begins to vibrate ex-
cessively.
If the machine starts to vibrate
abnormally, an immediate
check must be carried out,
- search for signs of damage;
- have any necessary repairs car-
ried out on damaged parts;
- examine for loose parts and
tighten these.
5) SERVICE
Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
Additional safety
instructions
TRAINING
• The appliance is not suitable
for use by children. Children
should be supervised to ensure
that they do not play with the
appliance. Cleaning and user
maintenance shall not be made
by children.
• This appliance is not intended
for use by persons with reduced
physical, sensory or mental ca-
pabilities, or lack of experience
and knowledge.
• Local regulations or bylaws
may determine the minimum
age for using the device.
• The operator or user is responsi-
30
ble for accidents or damage to
other persons or their property.
• Children and persons with lim-
ited physical, sensory or men-
tal capabilities or inadequate
experience and knowledge, or
persons who are not familiar
with the instructions, should
never be allowed to use the
machine! Local regulations may
specify an age limit for the user.
• Never let children or persons
who are not familiar with the
instructions mentioned use the
machine.
• Familiarise yourself with the
controls and how to use the ma-
chine correctly.
PREPARATION
• Before each use, carry out a
visual inspection on missing or
wrongly mounted protective
devices or parts of the cutting de-
vice.
• Before commissioning and after
any impacts, check for signs
of wear and damages, and
have any necessary repairs per-
formed.
• Use only approved extension
cables (H05VVH2-F, H03VVH2-
F) that are not more than 75 m
long and designed for outdoor
use. Always roll out the cable
drum completely before use.
Check the cable for damage
and ageing.
• Do not connect a damaged ca-
ble to the power supply. Do not
touch a damaged cable before
it has been disconnected from
the power supply, as you could
come into contact with live