Risk Of Damage; Filtering Time - Steinbach Classic 250N Active Balls+ Originalbetriebsanleitung

CLOSED
- Never switch on the pump in this mode!
- Use this mode to clean the prefilter (if available) or checking the system for leaks and
sealing the affected spots.
The water flow in the pump and in the filter is blocked. Make sure that feed and drain
hoses are filled with water and might have to be closed off with shut-off valves or plugs.
WASTE
- The pool can only be drained up to the minimum water level at
the height of the suction line. Make sure to switch the pump off
once this level is reached to prevent the pump from running dry.
- Use this mode to clean the pool in the case of heavy soiling.
The water is guided past the filter and discharged directly via the backwash line.
WINTER
- Never switch on the pump in this mode!
- Use this mode to store the filter system in the winter.
The valve lever is in an intermediate position which relieves the inner valve components.

Filtering time

The pool's water content should be turned over at least three to five times in 24 hours
depending on the use and the size of the system. The operating time depends on the
output of the filter system and the pool size.
44
NOTICE!

Risk of damage!

NOTICE!
Risk of damage!
NOTICE!
Risk of damage!