General Safety Instructions; Always Use Common Sense; Safety Instructions For Operation - Husqvarna DM400 Bedienungsanweisung

• When drilling overhead, always use the liquid
collection device specified in the instructions. Do not
allow water to flow into the tool. Water entering the
power tool will increase the risk of electric shock.

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
must read and understand the contents of this
operator's manual.
• Save all warnings and instructions.
• Comply with all applicable laws and regulations.
• The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
• Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
• Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
• Do not let a child operate the product.
• Only let approved persons operate the product.
• The operator is responsible for accidents that occur
to other persons or their property.
• Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
• Always be careful and use your common sense.
• This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Do not use the product if it is defective.
• Do not do modifications to this product.
• Do not operate the product if it is possible that other
persons have done modifications to the product.

Always use common sense

WARNING: Under no circumstances should
you modify the original design of the product
without approval from the manufacturer.
Always use original spare parts.
Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
1188 - 009 - 12.10.2020
WARNING: The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
It is not possible to cover every conceivable situation
you can face when using the product. Always exercise
care and use your common sense. Avoid all situations
which you consider to be beyond your capability. If you
still feel uncertain about operating procedures after
reading these instructions, you should consult an expert
before continuing.
Do not hesitate to contact your Husqvarna dealer if you
have any more questions about the use of the product.
We will willingly be of service and provide you with
advice as well as help you to use your product both
efficiently and safely.
Let your Husqvarna dealer check the product regularly
and make essential adjustments and repairs.
Husqvarna Construction Products has a policy of
continuous product development. Husqvarna reserves
the right to modify the design and appearance of
products without prior notice and without further
obligation introduce design modifications.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.

Safety instructions for operation

WARNING: Read the warning instructions
that follow before you use the product.
• Do not operate the product unless you can get aid if
an accident occurs.
• Do not use the product in bad weather, such as fog,
rain, strong winds, intense cold and equivalent
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
• Look out for persons, objects and situations that can
prevent safe operation of the product.
• When the drill points up during operation, always use
an applicable container to collect the water.
• Always attach the product to an applicable drill stand
before operation. Refer to
• Make sure that you always can stop the motor
quickly in an emergency.
• Make sure that there are no pipes or electrical
cables in the area where the hole will be made.
• If the product does not operate correctly, stop the
motor.
• Make sure that you are in a safe and stable position
during operation.
Accessories on page 19 .
9