Accessories; Service - Husqvarna DM400 Bedienungsanweisung

Indication on the product
3 green LEDs, 1 yellow
LED and 1 red LED.
All LEDs flash.
1 green LED flashes.

Accessories

Accessory
Drill stand DS 500
Slurry ring*
Sealing disc*
Rubber washer, part number 598 72
14-01
* Contact you local service agent for more information
Approved service center
To find your nearest Husqvarna Construction Products
approved service center, go to the web site
www.husqvarnacp.com.
1188 - 009 - 12.10.2020
Cause
There is a system overload.
™
Elgard motor overload protection is started.
™
Elgard motor overload protection has stopped
the motor.
™
Smartstart is started.
Accessories
Securing by vac-
uum pad: OK

Service

DM400
Other securing:
OK
OK
OK
OK
Possible solution
Decrease the load to prevent start of
™
the Elgard motor overload protec-
tion.
Decrease the load to go back to cor-
rect operation.
To reset the motor overload
Refer to
protection on page 13 .
To use Smartstart
Refer to
page 12 .
DM430
Securing by vac- Other securing:
uum pad: OK
OK
OK
OK
™
on
OK
19