Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PHKSA 12 B3 Originalbetriebsanleitung

Sound power level
(L ) ................. 97,4 dB(A); K
WA
Vibration (a )
h, W
Sawing in wood ............... = 3,27 m/s
Temperature........................... max 50 °C
Charging process .................. 4 - 40 °C
Operation ..........................-20 - 50 °C
Storage ................................ 0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B1,
PAPK 12 B2.
This type of battery may only be charged
with the following chargers: PLGK 12 A1,
PLGK 12 A2, PLGK 12 B2.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The specified vibration emission value can
also be used for a provisional assessment
of the load.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when
the electric tool is switched off and
= 3 dB
WA

Safety instructions

2
K= 1,5 m/s 2
Ensure that the safety instructions
are observed when operating the
appliance.

Symbols and icons

Symbols on the appliance:

Symbols in the manual

times when it is switched on but
running without any load).
Carefully read these operat-
ing instructions.
Wear safety goggles!
Wear breathing protection!
Wear hearing protection!
Do not use any damaged
saw blades
Maximum cutting depth
26 mm / 0°
Saw blade designation
85 mm
15 mm
This device is part of the
Parkside X 12 V TEAM
series
Electrical appliances must
not be disposed of with the
domestic waste.
Warning symbols with
information on damage
and injury prevention.
GB IE
23