Additional Safety Instructions; Additional Safety Instructions For Sabre Saws - Parkside PSTKA 12 B3 Originalbetriebsanleitung

f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect charging or charging
outside the permitted temperature
range may destroy the battery and in-
crease the risk of fire.
6) Service
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Additional safety
instructions
• Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with a live wire can also cause a
charge in metal parts of the device and
result in an electric shock.
• Fasten and secure the workpiece
by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or fire.
Observe the safety informa-
tion and notes on charging
and proper use as shown in
the instruction manual for
your battery and charger from
the Parkside X 12 V Team se-
ries. A detailed description of
the charging process and fur-
ther information can be found
in the separate operating in-
structions.
Additional safety
instructions for sabre saws
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the
blade there is a risk of injury.
• Move the power tool against the work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate is secure
during sawing. A tilted saw blade may
break or cause a kickback.
• After you have finished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come to
a standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after
switching the device off by applying
side pressure. The saw blade may be
GB IE
27