Technical Data - Parkside PSTKA 12 B3 Originalbetriebsanleitung

16 Saw blade for wood
17 Allen key
18 Parallel guide
19 Adapter for external dust extrac-
tion
20 Reducer
21 Recess in slide shoe
22 Tension tear protection
23 Rechargeable battery
24 Release button for rechargeable
battery
25 Charger
26 Storage case
27 Rotary wheel

Technical data

Cordless Jigsaw ........ PSTKA 12 B3
Nominal input voltage U .............. 12 V
Idle speed n ................1500 - 2800 rpm
0
Saw stroke .................................. 18 mm
Cutting depth in wood .......... max. 70 mm
Cutting depth in aluminium ...... max. 3 mm
Weight (with battery) ........ Approx. 1.6 kg
Sound pressure level
(L ) ................... 77,2 dB(A), K
pA
Sound power level
(L ) ................. 88,2 dB(A), K
WA
Vibration (a )
h
in wood ........ 12,27 m/s
in metal ......... 14,67 m/s
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
= 5 dB
pA
= 5 dB
WA
; K= 1,5 m/s
2 2
2 ;K= 1,5 m/s 2
This device can only be operated with the
following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2,
PAPK 12 B1, PAPK 12 B2.
This type of battery may be charged with
the following chargers: PLGK 12 A1,
PLGK 12 A2, PLGK 12 B2.
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
GB IE
23