Herunterladen Diese Seite drucken

HANSGROHE PuraVida 15775403 Gebrauchsanleitung, Montageanleitung Seite 2

Vorschau ausblenden Andere Handbücher für PuraVida 15775403:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
• Safety against backflow
• The product is exclusively designed for drinking
water!
2
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
max. 70°C / 4 min
English
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 8)
After the installation, the output temperature of the
thermostat must be checked. A correction is necessary if
the temperature measured at the output differs from the
temperature set on the thermostat.
Safety Function (see page 8)
The desired maximum temperature for example max.
42º C can be pre-set thanks to the safety function.
Maintenance (see page 10)
• The check valves must be checked regularly
according to EN 806-5 in accordance with national
or regional regulations (at least once a year).
• To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Dimensions (see page 13)
Flow diagram (see page 13)
free flow
Spare parts (see page 14)
+
Special accessories (see page 15)
order as an extra
65°C
• extension 25 mm #13595000
• Extension Set 22 mm (when wall is not deep
enough)#15597000, #13597000
Cleaning (see page 15)
Operation (see page 12)

Werbung

loading

Diese Anleitung auch für:

Metris 31572003