Herunterladen Inhalt Inhalt Diese Seite drucken

Parkside PMH 2400 A1 Originalbetriebsanleitung Seite 24

Messerhäcksler
Vorschau ausblenden Andere Handbücher für PMH 2400 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
IE
concentration or have consumed
alcohol or tablets, do not work
with the machine. Always have
a break on time. Work using
common sense.
• When feeding in material, pay
special attention to ensure it
does not contain any metal,
stones, bottles, cans or other for-
eign bodies.
• If foreign bodies enter the cut-
ting tools, or if the machine
generates unusual noises or
vibrates unusually, immediately
turn off the power supply and
allow the machine to come to a
standstill. Disconnect the machi-
ne from the mains supply and
perform the following steps be-
fore switching the machine on
again and operating it:
-
check the machine for damage;
-
replace or repair all damaged
parts;
-
check whether there are any
loose parts and tighten as
necessary.
• Ensure the material being
processed does not collect in the
ejection zone; this could prevent
proper ejection and lead to the
material being thrown back out
through the feed opening.
• If the machine becomes clog-
ged, turn off the power supply
and disconnect the machine
from the mains supply before
starting to clean it out.
Ensure the motor is free of waste
and other deposits to protect the
motor from damage or the po-
tential for fire.
• Do not operate the machine
24
with damaged or defective
safety equipment or protective
guards, of if the safety equip-
ment, e.g. the collection bag,
are not in place.
• Do not operate the machine
with a damaged or worn out
cable.
Do not connect a damaged
cord to the power supply.
• Keep the extension cable away
from dangerous moving parts to
prevent damage to cables that
can lead to contact with live
parts.
• Keep the ventilation holes free
of waste and other deposits to
protect the motor from damage
or fire.
• Do not transport the machine
while the motor is in operation.
• Switch the machine off and pull
out the mains plug. Make sure
that all moving parts have come
to a complete stop
- before leaving the machine;
- before clearing any blockages
or cleaning out clogged ducts;
- if the connection cable or ex-
tension cable is damaged or
entangled;
- before checking, cleaning or
working on the machine.
• Do not tilt the machine while the
motor is running.
• Do not overload your machine.
Only work within the power
range indicated. Observe the
maximum indicated branch
thickness. Do not use your ma-
chine for purposes for which it
is not intended.
• Only turn off the machine once

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis