Troubleshooting - Klarstein 10027050 Handbuch

CLEANING AND MAINTENANCE
1. Always unplug the blender from the power source before cleaning.
2. Clean the machine and relative parts after use.
3. The outer case can be wiped with a damp cloth.
4. Clean the jar every time after use . Do not use abrasives or stiff brushes to clean the blender
base or blender jug as this will make them dull or scratch them.
5. There will be some sediment attached to the blades after use .This will affect the blades so please
ensure they are cleaned for optimum performance.
6. Make sure the machine is clean and dry before you store it away.
7. Please unplug the machine when not in use for long periods of time and keep the machine away
from dust, insects and moisture.
8. DO NOT CLEAN THE BLENDER JUG AND LID IN A DISHWASHER.
Problem
Blender fails to run
Increased vibration
and noise
Leaking from lid
If the problem is still not resolved, please contact your local Distributor for maintenance.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please
contact your local council or your household waste disposal service.
DECLARATINO OF CONFORMITY
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
TROUBLE SHOOTING
Possible cause
No power connection
Motor overheat protector was
tripped
The machine is not on a level
surface
The blender jug has not been
placed on the base completely
Container is too full
Water or liquid is too high
The lid is not fi tted properly
HINTS ON DISPOSAL
Solution
Plug in correct power outlet
Allow motor to cool down with power off
in cool spot
Place the machine on a level surface
Make sure the blender jug is placed
securely
Decrease the ingredients
Decrease the water or liquid
Place the lid tightly on the blender jug
8