Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Make sure the voltage is correct according to the plug label.
2.
With the unit in Off position,place container on the blender base. Be sure container is fully seated
and that drive coupling is properly engaged. Plug blender cord into outlet.
3. Put ingredients into container and cover it. Do not fill above Max Line.
4. Ensure the blender jar,lid,fill cap and tamper are clean and prepare your ingredients before operation.
1.
Placing materials into the blender jar.
a) Place soft materials or liquids in first,then hard materials or ice in last. Large ingredients
should be sliced or broken into chunks before being placed in the jar for better blending results.
b) Most ingredients should be started on a low speed then changed to medium or high or started
with the timer. If the ingredients get stuck you can press 'PULSE' 2 or 3 times to refresh and
then use the tamper to help blending.
2.
Place the lid tightly on the blender jar.
3.
Put the blender jar onto motor base correctly.
PARTS DESCRIPTION
PREPARATION
PLACING INGREDIENTS
1
Fill cap
2
Black lid
3
Plastic jar
4
Blades assembly
5
Retainer Nut
6
Drive socket
7
Switch panel
8
Cushion Pad
9
Rubber feet
10 Base housing
11 Overloading switch
6
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
