Additional Safety Instructions For The Planer - Parkside PHA 12 B2 Originalbetriebsanleitung

c) When not in use, keep
batteries away from pa-
per clips, coins, keys,
nails, screws or other
small metal objects that
could cause the contacts
to be bridged. A short circuit
between battery contacts can
result in burns or a fire.
d) When misused, fluid may
leak from the battery.
Avoid any contact with
it. On accidental contact,
wash in running water. If
the fluid comes into con-
tact with the eyes, seek
medical assistance also.
Leaking battery fluid can cause
skin irritation or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be
unpredictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explosion.
g) Follow all instructions for
charging and never char-
ge the battery or the bat-
tery-powered tool outside
the temperature range
stated in the operating in-
structions. Incorrect charging
or charging outside the permit-
ted temperature range may des-
troy the battery and increase
the risk of fire.
6) SERVICE
a) Only have qualified per-
sonnel repair your power
tool and only use original
spare parts. This ensures the
safety of the device is main-
tained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised
customer service centres only.
Additional safety
instructions for the planer
a) Wait for the blade shaft to
come to a stop before put-
ting the power tool down.
An exposed rotating blade shaft
may snag the surface, causing
loss of control and serious injury.
b) Fasten and secure the
workpiece by means of
clamps or with another
method on a stable base.
If you hold the workpiece only
with your hand or against your
own body, it will stay instable
and this can lead to a loss of
control.
c) Do not reach into the
ejection chute with your
hands. Risk of injury from the
planer blades.
d) Always hold the planer
so that it lays flat on the
workpiece when working.
The planer could otherwise tilt
and cause injury.
e) The planer should only
be moved over the work-
piece when it is turned on.
There is a risk of kickback if the
planer tilts.
f) Only wood may be
planed, not metal.
GB IE
25