Hammer Safety Warnings; Vibration And Noise Reduction - Parkside PAH 1700 C3 Originalbetriebsanleitung

Service
Have your power tool serviced by
1)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained .
˜ Hammer safety warnings
1 . Wear ear protectors. Exposure to noise
can cause hearing loss .
2 . Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury . Firmly tighten the auxiliary
handle . Hold the power tool firmly with both
hands while working and keep proper footing
and balance at all times . The power tool is
always securely guided with both hands .
3 . Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden wiring
or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock .
4 . Use appropriate detectors to determine if
utility lines are hidden in the work area .
Contact with electric line can lead to fire or
electric shock . Damaging a gas line can lead
to explosion . Penetrating a water line can
bring property damage .
5 . Wear a dust mask. Dust from materials
such as lead-containing coating, wood,
mineral and metal can be harmful to people
health and cause allergic reaction, lead to
respiratory infection or cancer . Material
containing asbestos can only be worked
by qualified people . It is recommended to
observe the relevant regulation of the material
to be worked in your country before working
and wear respirator (P2 filter class) when
working .
˜ Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment .
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its
¾
design and these instructions .
Ensure that the product is in good condition
¾
and well maintained .
Use correct accessory tools for the product
¾
and ensure they are in good condition .
Keep tight grip on the handles / grip surface .
¾
Maintain this product in accordance with
¾
these instructions and keep it well lubricated
(where appropriate) .
Plan your work schedule to spread any high
¾
vibration tool use across a longer period of
time .
GB/IE 25