Safety Instructions; General Power Tool Safety Warnings - Parkside PAH 1700 C3 Originalbetriebsanleitung

m
WARNING!
Wear hearing protection!
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another .
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure .
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time . All
parts of the operating cycle must be taken
into account (e . g . times when the power
tool is switched off and when it is running
idle in addition to the trigger time) .
22 GB/IE

Safety instructions

˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings and
u
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
Keep work area clean and well
1)
lit. Cluttered or dark areas invite accidents .
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control .