Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Removing/Inserting The Battery; Checking The Battery Charge Level; Recharging The Battery - Parkside PBSA 12 D2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PBSA 12 D2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
IE
Warning! During operation,
this electric tool generates an
electromagnetic fi eld which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant be-
fore operating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 12 V Team series. A
detailed description of
the charging process
and further information
can be found in the se-
parate operating inst-
ructions.

Operation

Removing/inserting the
Battery
1. To remove the battery (10) from the ap-
pliance, press the release button (11)
on the battery and pull out the battery.
2. To insert the battery (10), place it on
the guide track and push it into the ap-
pliance. It will audibly snap in.
26
Checking the battery charge
level
10) charge level is indi-
The battery's (
cated by the charge state indicator (
The LEDs indicate the battery's charge
level, when the device is in operation.
Press and hold the power button (
red-yellow-green => Battery fully charged
red and yellow
=> Battery half charged
red
=> Battery needs

Recharging the battery

Allow a hot battery to cool before
charging.
Charge the battery (
only the red LED on the level indica-
tor is illuminated.
The charging time is around 1 hour.
1. Remove the battery (
appliance if necessary.
2. Plug the battery charger (
mains outlet.
3. Insert the battery (
ing compartment of the battery charger
13).
(
4. Pull the battery (
tery charger (
5. Unplug the battery charger (
from the mains.

Choice of gear

Slide the gear selector (5) to 1 or 2,
corresponding to a low or high torque
selection.
7).
to be charged
10) when
10) from the
13) into a
10) in the charg-
10) out of the bat-
13).
13)
4).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 334017_1910

Inhaltsverzeichnis