Husqvarna AUTOMOWER 105 Bedienungsanweisung Seite 13

product is not allowed to mow due to a timer
setting.
MENU text illustrates that the main menu can
• The
be reached by pushing the multi-choice button that
is located under the text.
3.4 Keypad Automower
Use the keypad on the product to navigate in the menu.
To access the keypad, push the STOP button.
• Use the START button (A) to start the operation of
the product.
• Use the 3 multi-choice buttons (B) to select the
functions shown in the display above the buttons.
• Use the operation selection button (C) to select the
operation mode of the product.
• Use the number buttons (D) to enter PIN code,
time and date.
B
A
3.5 Display Automower
305/310/315/315X/420/430X/440/450X
When the STOP button has been pushed and the hatch
is opened, the following information is displayed:
• Operating information, e.g.
PARKED or SCHEDULE . READY is displayed if
the product is not in any specific operating mode,
e.g. if the product has just been switched on. If the
STOP button is pushed the product displays what
it did prior to the stop, e.g.
SEARCHING .
• Date and clock show the current time.
®
• For Automower 315X/430X/450X: The satellite
symbol is shown when the GPS-supported
navigation is activated. Symbol (A) is shown when
the symbol has made contact with a sufficient
number of GPS satellites. Symbol (B) shows when
the product has not made contact with a sufficient
1418 - 007 - 17.09.2020
®
105
•
•
C
•
D
®
•
•
READY , MOWING ,
3.6 Keypad Automower
305/310/315/315X/420/430X/440/450X
MOWING or
The keypad consists of 6 groups of buttons:
number of GPS satellites. Symbol (A) blinks during
the first days the product is working, as it is
collecting GPS information about the installation.
A
The ECO symbol is displayed if the product is set
ECO mode .
in
The black clock symbol (A) is shown when the
product is not allowed to mow due to a
setting. If the product is not allowed to mow due to
Weather timer , symbol (B) is shown. If the
operation mode Override schedule is chosen,
symbol (C) is shown.
A B
The battery status shows the remaining battery
charge. If the product is loading, a flash is also
shown over the battery symbol (A). If the product is
placed in the charging station without charging, (B)
is shown.
A
The height adjustment setting is displayed as a
scale/numerical value.
For Automower ® Connect@Home (refer to
Automower ® Connect@Home on page 16 ): An
®
icon for Bluetooth wireless communication will
appear in the product display when connection
with your mobile device has been established.
®
B
Schedule
C
B
Installation - 13