Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Impact Force; Use; Switching On; Troubleshooting - Parkside PAT 12 A1 Originalbetriebsanleitung

Akku-tacker
Vorschau ausblenden Andere Handbücher für PAT 12 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53

Setting the impact force

NOTE
Select the lowest impact force sufficient for
stapling. Take into account the length of the
staples or nails you are using as well as hard-
ness of the material you are working with.
Increasing the impact force
Turn the impact force control
Reducing the impact force
Turn the impact force control
NOTE
Ensure the correct position for the nails (see
main diagram, face plate
After filling, push the release
zine shaft
as far as the stop until it clicks into
place.
NOTE
The fill level indicator
magazine contains staples.

Use

Switching on

Press the stapler nose
material that you want to staple until it is pushed
in a few millimetres.
Press the trigger
GB │ MT
44 
clockwise.
anticlockwise.
on the tool).
into the maga-
shows whether the
onto the part of the
.

Troubleshooting

Cause
A staple is blocking the tool.
Solution
Remove the battery pack
Turn the tool over.
Press in the releases
Pull the magazine slider
release the tension.
Remove the staple.
WARNING!
Do not hold the power tool by the trigger
the staple is jammed in the power tool. While
removing a jammed staple, the trigger
be accidentally activated.

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always switch the tool off and
remove the battery before carrying
out any work on it.
The tool is maintenance-free.
The tool must always be kept clean, dry and
free from oil or grease.
Use a soft, dry cloth to clean the housing.
Never permit liquids to penetrate inside the tool.
If a lithium-ion battery is going to be stored for
an extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.
from the tool.
(see fig. A).
backwards. This will
if
can
PAT 12 A1

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis