Service; Importer; Disposal - Parkside PBLG 52 A1 Originalbetriebsanleitung

The warranty period does not apply to
■ Normal reduction of the battery capacity over time
■ Commercial use of the product
■ Damage to or alteration of the product by the customer
■ Non-compliance with safety and maintenance instructions, operating
errors
■ Damage caused by natural hazards
Warranty claim procedure
To ensure quick processing of your case, please observe the following
instructions:
■ Please have the till receipt and the item number (e.g. IAN 12345)
available as proof of purchase.
■ You will find the item number on the type plate on the product, an
engraving on the product, on the front page of the operating instructions
(below left) or on the sticker on the rear or bottom of the product.
■ If functional or other defects occur, please contact the service depart-
ment listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service
address that will be provided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about what the defect is and
when it occurred.
You can download these instructions along with many
other manuals, product videos and installation software at
www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating
instructions by entering the item number (IAN) 123456.

Service

Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 341672_1910

Importer

Please note that the following address is not the service address. Please use
the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
PBLG 52 A1

Disposal

The packaging is made from environmentally friendly material
and can be disposed of at your local recycling plant. The appli-
ance and its accessories are made from various materials, such
as metal and plastic.
Your local community or municipal authorities can provide information on
how to dispose of the worn-out appliance.
Environmental protection
■ Carefully empty the petrol and oil tank and dispose of your appliance
at a recycling plant. The plastic and metal parts used can be separated
and recycled.
■ Dispose of waste oil and petrol at a waste collection centre and do not
dump these into the sewerage or drainage system.
■ Dispose of contaminated maintenance material and consumables at a
collection point provided for this purpose.
Dispose of the packaging in an environmentally friendly
manner. Note the labelling on the packaging and separate the
packaging material components for disposal if necessary.
The packaging material is labelled with abbreviations (a) and
numbers (b) with the following meanings: 1–7: plastics, 20–22: paper and
cardboard, 80–98: composites.
Your local community or municipal authorities can provide
information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer
responsibility and is collected separately.
GB │ IE │
23 ■