Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started/Setup; Package Contents; Before You Connect To The Network: Mounting Kit Instructions; Additional Information - Dell PowerConnect Serie Systeminformationshandbuch

Unverwaltete switches
Vorschau ausblenden Andere Handbücher für PowerConnect Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 99

Getting Started/Setup

Package Contents

Before you begin installing the switch, confirm that your package contains the following items:
Switch
AC power cable
Self-adhesive rubber pads for desktop installation
Rackmount kit for rack installation
Dell PowerConnect CD

Before You Connect to the Network: Mounting Kit Instructions

The switch is supplied with rubber feet for stationing it on a flat surface and mounting brackets and screws for
mounting it in a rack.
Installing the Switch on a Flat Surface
The switch can be installed on any appropriate level surface that can safely support the weight of the hubs and
their attached cables. There must be adequate space around the switch for ventilation and access to cable
connectors.
To install the switch on a flat surface:
1
Set the switch on the flat surface and check for proper ventilation.
Allow at least 5.1 cm (2 inches) on each side for proper ventilation and 12.7 cm (5 inches) at the back for
power cable clearance.
2
Attach rubber feet on each marked location on the bottom of the chassis.
The rubber feet are optional but are recommended to keep the unit from slipping.
Installing the Switch in a Rack
The switch can be installed in most standard 48.3-cm (19-inch) racks.
NOTE: For racks that are not prethreaded, cage nuts are provided.
To install the switch in a rack:
1
Use the supplied screws to attach a mounting bracket to each side of the switch.
2
Position the switch in the rack and align the holes in the mounting bracket with the holes in the rack.
3
Insert and tighten two screws appropriate for your rack through each of the mounting brackets.

Additional Information

For more information about installing, setting up, and using your switch, see the User's Guide that came with your
switch.
Downloaded from
www.Manualslib.com
manuals search engine
Unmanaged Sw itches Sy stem Infor m ation Guide
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Powerconnect 2124

Inhaltsverzeichnis