Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting To A Compressed Air Source; Operation; Switching On And Off; Polishing - Parkside PDAP 75 A1 Originalbetriebsanleitung

Druckluft-polierset
Vorschau ausblenden Andere Handbücher für PDAP 75 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 106

Connecting to a compressed air source

NOTE
Before connecting the compressed air source,
the correct working pressure (3–6 bar) must be fully reached
make sure that the trigger is in the upper position
Attach the appliance to a compressor by connecting the connec-
tor nipple
The compressed air source must be equipped with a pressure
reducer so that you can regulate the air pressure .

Operation

Switching on and off

Switching on
Press the trigger
Switching off
Release the trigger
When you have finished working, disconnect the appliance from
the compressed air source .

Polishing

Add a little polish to the fitted polishing attachment
the workpiece .
Polishing hood
Polishing hood
Fake fur attachment
Manually spread the polish of the surface you want to polish .
Switch on the compressed air source and allow it to run until the
maximum tank pressure has been reached .
94 
GB │ MT
with the supply hose of the compressed air source .
to turn the appliance on .
.
(orange) for pre-polishing
(black) for final polishing
for high-gloss polishing
,
and
PDAP 75 A1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis