What To Do If; Technical Data - IKEA LAGAN H4K Bedienungsanleitung

ENGLISH

What to do if...

Problem
The hotplates are not func-
tioning
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.

Technical data

Rating Plate
Made In Italy
© Inter IKEA Systems B.V. 1999
001-522-15
21552
PQM
ZO
Made In Italy
© Inter IKEA Systems B.V. 1999
601-522-03
21552
PQM
ZO
The graphics above represents rating plate of
the appliance (without serial number which is
generated dynamically during the production
process), which is located at its underneath
surface of the casing.
Possible cause
The combination appliance is
not switched on
The desired heat setting is not
set.
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped.
EU
EU
Remedy
Switch on the appliance.
Set the heat setting.
Check the fuse. If the fuses trip
a number of times, please call
an authorized electrician.
If you operated the appliance wrongly, or
the installation was not carried out by a
registered engineer, the visit from the customer
service technician or dealer may not take
place free of charge, even during the warranty
period.
PNC. 949800911
TYPE H6ML04-0/**
PNC. 949800912
TYPE H6ML04-0/**
Dear Customer, please apply here aside the
sticker you can find in the dedicate plastic bag
inserted inside the hob packaging. This will al-
low us to assist you better, by identifying pre-
cisely your hob, in case you will need in future
our assistance. Thank you for your help!
7
kW max 6.0
~
230 V 50 Hz
kW max 6.0
~
230 V 50 Hz