Troubleshooting - ZENEC ZE-MU620IR Bedienungsanleitung

TROUBLESHOOTING

Problem:
No picture and sound
when the monitor is
turned on.
Blurry picture on the
screen.
No function of the
remote control.
The picture is too dark.
ZE-MU620IR Manual D+E.ai 19
Downloaded from www.Manualslib.com
Cause
1. The power wire
connection is wrong or
the fuse is blown.
2. The system cable is not
in the right position.
1. Electrical interference.
(e.g. high voltage wire,
transformer station
or aircraft, etc...).
The remote control
1.
battery is drained.
The remote control is
2.
damaged.
1. The unit is used in low
temperature area.
2. The brightness is set too
low.
manuals search engine
:
19
ENGLISH
Remedy
:
1. Check the power wire
and replace the fuse.
2. Check the system cable
or replace it with a new
one.
1. The picture quality will
improve, when monitor
moves away from the
source of interference.
1. Change the battery
against a new one.
2. Contact your dealer for a
new remote control.
1. The effect is typical of
the LCD operating at
low temperatures. The
picture is gradually
restored when the
temperature of the unit
and the surrounding rises.
2. Adjust the brightness.
12.10.2007 12:06:15 Uhr