Asus AIR Benutzerhandbuch Seite 21

Downloaded from www.Manualslib.com
To program an alarm:
1. Go to Configuration.>.Alarm.>.Turn.On.
2. Select Set.Alarm.Time and enter values. Refer to the "Text
entry" section on page 6 for details about entering numbers.
3. Select Set.Alarm.Sound to choose a sound type from Beep,
Melody, and Radio (the station you last listen to).
4. The icon will appear at the upper right corner of the
display to indicate that the alarm function is activated.
Make sure that the device is not connecting to any stations at
the set time, or the alarm will not set off. When the alarm sets off,
press any button to stop it.
Language
Refer to page 5 for details about language selection.
Bac�light
The Configuration.>.Bac�light option allows you to adjust the
brightness of the backlight. You can also shift the backlight mode
by pressing the Bac�light button
Three modes are available:
• Turn.Off: Select to turn off the backlight.
• Power.Saving:.Select to turn down the backlight.
• Turn.On:.Select to turn on the backlight.
Sleep.Timer
The Configuration.>.Sleep.Timer option allows you to select a
preset amount of time after which the device shuts off. You can
also set the sleep timer by pressing the Sleep button
remote control. When this function is activated, the XXX icon
will appear at the upper right corner of the display, XXX
signifying the minutes left. Six options are available: Turn.Off,
15.Minutes, 30.Minutes, 60.Minutes, 90.Minutes, and
120.Minutes.
manuals search engine
on the remote control.
on the
ASUS Internet Radio 13