Remote Control; Network - Yamaha MCR-750 Bedienungsanleitung

TROUBLESHOOTING

Remote control

Problem
The remote control
does not work nor
function properly.

Network

Problem
Cannot connect to
the Internet.
Cannot download
BD-Live contents.
Cannot detect the
DLNA server.
Cannot play the file
on the home network
server.
46
En
Cause
The remote control is operated outside its
operation range.
The remote control sensor on this unit is
exposed to direct sunlight or lighting.
The battery is worn out.
There are obstacles between the sensor of
this unit and the remote control.
Cause
Incorrect cable connections.
The connected equipment is turned off.
Connections of the broadband router and/
or modem are incorrect.
The network setting is incorrect.
Incorrect cable connections.
Incorrect USB device connections.
The BD disc does not support BD-Live.
The network setting is incorrect.
The USB memory device is not
compatible.
There is insufficient free space on the
USB memory device.
Incorrect cable connections.
The connected equipment is turned off.
The access point of this unit and the
server are not the same.
The network setting is incorrect.
The DLNA server does not permit this
unit.
The file is not supported by this unit.
The DLNA setting is incorrect.
Remedy
For information on the remote control operation
"Using the remote control"
range, refer to
Change the lighting or orientation of this unit.
Replace the battery with new one.
Remove the obstacles.
Remedy
Connect the Network cable properly.
Turn on the connected equipment, such as the
broadband router or modem.
Connect the broadband router and/or modem
correctly.
Set the proper value(s) in the network setting. Refer
to "Network".
Connect the Network cable properly.
Connect the USB memory device properly. Check
that the USB memory device is connected to the
USB port of this unit.
Check if the BD disc supports BD-Live.
Check the setting for [Internet Connection].
Connect the USB memory device formatted in
FAT16 or FAT32.
It is recommended to connect the USB memory
device with at least 2 GB of free space. If there is not
enough free space, format the USB memory device.
Refer to the supplied user's manual of the disc or
consult the disc manufacturer.
Connect the network cable properly.
Turn on the connected equipment, such as the
broadband router or the server.
Confirm this unit and the server are connected to the
same access point.
Set the proper value(s) in the network setting. Refer
to "Network".
Depending on the DLNA server, this unit may need
to be permitted from the server.
Make sure the file is playable.
Check your DLNA server's setting.
The playback and operating quality may be affected
by your home network condition.
Page
9
.
—
9
—
Page
13
—
—
35
13
13
—
35
13
34
—
13
—
—
35
—
3
35
—