Ipod - Yamaha MCR-750 Bedienungsanleitung

iPod

Note
In case of a transmission error without a status message appearing on the front panel display of this unit, check the connection to your
iPod (refer to page 11).
Status message
READING
UNKNOWN
STOP
NO iPod
Problem
No sound.
The power of this unit is off.
The iPod software version has not been
updated.
The iPod is in the process of connecting
with this unit.
No sound. The iPod is not connected correctly.
The iPod sounds, but
you cannot operate it
with this unit or the
remote control.
No sound of your
No sound of your iPod can be output
iPod from the TV. from this unit to the TV through the
HDMI cable.
This unit cannot be
The iPod is not supported by this unit.
operated by the
remote control.
The iPod is not connected correctly.
The iPod software version is out of date.
You cannot operate The iPod is not connected correctly.
from the iPod.
The playback
The iPod you set is not compatible with
information is not the playback information display.
displayed on the
front panel display.
Cause
This unit is in the middle of recognizing
the connection with the iPod.
There is a problem with the signal path
from the iPod to this unit.
The iPod being used is not supported by
this unit.
The iPod software is out of date.
The play back of the iPod is finished.
For example, all the songs in the
selected album have finished being
played back.
The iPod was disconnected from this
unit.
Cause
Remedy
If the message continues to appear on the front panel
display and playback does not start, connect the iPod
again.
Connect the iPod again.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
Update the iPod software version to the latest.
Connect the iPod and this unit by a USB cable
correctly.
Remedy
Connect the power cable correctly.
Download the latest iTunes software to update the
iPod software version to the latest.
Please wait for a while.
Connect the iPod and this unit by a USB cable
correctly.
Use the speakers of this unit.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
Connect the iPod and this unit by a USB cable
correctly.
Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
Connect the iPod and this unit by a USB cable
correctly.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
TROUBLESHOOTING
Page
—
11
11
—
11
Page
11
—
—
11
—
11
11
—
11
11
43
En