Using The Feature Of Bd-Live; Enjoying Bonusview™ And Bd-Live; Using Picture In Picture Function - Yamaha MCR-750 Bedienungsanleitung

ADVANCED PLAYBACK OPERATION
3
Press 5/a or number buttons to set/adjust the value
of the focused item, and press ENTER to jump to the
specified point.
4
To close the status bar, press STATUS.
Enjoying BONUSVIEW™ and BD-
Live™
This unit supports BONUSVIEW (p. 48) (BD-ROM
Profile 1 Version 1.1) and BD-Live (p. 48) (BD-ROM
Profile 2) playback functions.
Note
Functions and playback method vary depending on the disc.
Refer to the guidance on the disc or the supplied user's manual.

■ Using Picture in Picture function

(secondary audio/video playback)
BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a small
video in the corner.
Primary video
1
While PIP Mark (
) is displayed, press PIP to turn the Picture in
(
Picture function on/off.
Notes
• To listen to secondary audio from a TV connected with an
HDMI cable, make sure that the Audio Output setting (HDMI)
is set to [PCM] (p. 38).
• Depending on the disc, to listen to secondary audio, you may
need to set secondary audio to on from the top menu of the disc
(p. 8).
• The secondary audio and video for Picture in Picture may
automatically play back and be removed depending on the
content. Also, playable areas may be restricted.
24
En
Secondary video
) or Secondary Audio Mark

■ Using the feature of BD-Live™

1
Set the Network setting (p. 35).
2
Connect the USB memory device to this unit (p. 13).
• BD-Live data is saved in a USB memory device
connected to this unit.
• Connect a USB memory device (2 GB or greater
and formatted with FAT 32/16) supporting USB
2.0 High Speed (480 Mbit/s) to the USB port that
you select on Local Storage (p. 34). The default
setting is the USB port on the rear panel.
• A "BUDA" folder is created automatically in the
USB memory device when necessary.
• If there is insufficient storage space, the data will
not be copied/downloaded. Delete unneeded data
or use a new USB memory device.
• Some time may be required for the data to load
(read/write).
3
Play back the disc.
4
Run BD-Live according to the instructions on the
disc.
Notes
• Regarding playback method of BD-Live contents, etc.,
perform the operations in accordance with the instructions
in the BD disc manual.
• To enjoy BD-Live functions, perform the network
connection (p. 13) and Network settings (p. 35).
• Refer to "[BD-Live Connection]" (p. 35) regarding the
setup to restrict access to BD-Live contents.
• The time required to download the provided programs into
the USB memory device connected to this unit varies
depending on the internet connection speeds and the data
volume of the programs.
• BD-Live programs provided through the internet may not
be able to display the connection depending on the status
(upgrading) of the provider. In such cases, take out the
disc and try again.
• If the BD-Live screen does not appear for a while after
you select the BD-Live function in the BD disc menu, the
USB memory device may not have enough free space. In
such cases, eject the disc from this unit, and then erase the
data in the USB memory device selecting [Format] in
[Local Storage] (p. 34).