Hama 00176581 Bedienungsanleitung Seite 3

• Whenever changing a light, always ensure that
the light or tting in question is voltage-free.
Switch it off and/or pull the mains plug.
• Not suitable for operation with dimmers,
electrical switches, photo cells, time switches or
twilight switches.
• As with all electrical products, this device
should be kept out of the reach of children.
• Switch the light off via the light switch if it is
not going to be used for a prolonged period
of time (e.g. holiday). Please be aware that
the presence simulation function cannot then
be activated.
Warning
• Please note that lights (even LEDs) can
generate heat and may become hot. Always
let the light cool off for a few minutes
before touching it or changing it.
• The device can only be operated on a 230
V / 50 Hz AC voltage network. Work on the
230 V network must only be carried out by
an electrician certi ed in your country. The
applicable accident prevention regulations
must be adhered to.
• To avoid an electric shock from the device,
please disconnect the mains voltage (switch
off the automatic circuit breaker). Failure to
comply with the installation instructions can
cause res or other hazards.
Risk of electric shock
• Do not open the product and do not
operate it if it is damaged, if smoke, a
strange smell or loud noises are coming
from it. Immediately contact your dealer or
our service department (see item "Service
and Support").
5. Here's how easy it is:
• Download the Hama Smart Solution APP
from the Apple App Store or Google Play Store
• Open the Hama Smart Solution APP
• The rst time you use the app, you need to
register and create a new account. If you
already have an account, log in with your
access details
• Screw the LED light into the appropriate tting
• The LED light starts to ash quickly (if it does
not, switch the LED light ON and OFF again
quickly 3 times at your switch)
• Now click the + at the top right-hand corner
and select Lighting.
• Con rm that the light is ashing quickly.
• Now enter the name of your WiFi network
and the password and con rm.
• The light is now connected. Once the connec-
tion is successful, the light will stop ashing
• You can now set up, control and con gure the
WiFi Smart LED light with the APP
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
7. Recycling Information
Note on environmental protection:
After the implementation of the
European Directives 2012/19/EU and
2006/66/EU in the national legal
system, the following applies:
electrical and electronic devices as
well as batteries must not be disposed of with
household waste. Consumers are obliged by law
to return electrical and electronic devices as well
as batteries to the designated public collection
points or to the point of sale at the end of their
service lives. Detailed information on this topic is
de ned in the national laws of the respective
country. This presence of the above symbol on
the product, operating instructions or package
indicates that the product is subject to these
regulations. By recycling, reusing the materials
or other forms of utilising old devices/batteries,
you are making an important contribution to
protecting our environment.
3