Bahnschranke mit behang
vollautomatisch, mit zubehör (16 Seiten)
Inhaltszusammenfassung für Viessmann 4027
Seite 1
Viessmann Modellspielwaren GmbH Am Bahnhof 1 D - 35116 Hatzfeld Licht-Sperrsignal Colour Light Blocked Signal 4027, 4028 (H0) 4447, 4448 (N) 4947, 4028 (TT) Betriebsanleitung Operating Instructions Nicht bestimmt für Kinder unter 14 Jahren. Enthält Kleinteile. Bei unsachgemäßem Gebrauch besteht Verletzungsgefahr durch funktionsbedingte scharfe Kanten und Spitzen! Bitte diese Betriebsanleitung gut verwahren.
Seite 2
Zugbeeinflussung. Dieses macht den Anschluß der Signale so einfach. Das Motto heißt “Auspacken, Anschließen und Losfahren”. Elektronische Vorkenntnisse sind nicht notwendig! The Hobby colour light blocked signals from Viessmann convince by an excellent price-service relation and by an easy mounting and connecting. The foot box contains the electronic for a rea- listic controlling of the aspects as well as the relays for the train stop.
Seite 3
Depending on the key you press, you can see the signal aspect “shunting stop” or “shun- ting stop cancelled”. The two red wires of the Hobby-signal switch the power at the insulated stop track off, if the signal displays “shunting stop”. Abbildung 2 Figure 2 4027 Das rechte 4028 Schienenprofil 4447 entspricht bei Märklin dem...
Seite 4
14-16 V model train transformer (AC/DC) - for example Viessmann 5200. By alternating connection of the blue wires to the pole of the model train transformer on which the brown wire has been connected to, you get the...
Seite 5
Zum Testen des Sperrsignales sind das gelbe und das braune Kabel vom Signal an je einem Pol eines 14- 16 V - Modellbahn- (AC/DC) - z.B. Viessmann 5200 - anzuschließen. Beim kurzzeitigen (abwech- transformators selnden!) Anschluß der blauen Kabel an den Pol des Trafos, an dem sich das braune Signalan- schlußkabel befindet, ergeben sich folgende Funktionen:...
Hobby signals can also be controlled by digital systems (see figure 3). If you connect the signals to digital decoders like Viessmann 5211 (for Märklin-Digital or the Motorola format) or the Viess- mann 5212 for the NMRA (DCC)-Format, it is necessary to connect the brown signal wire (ground), which is connected to the transformer, to the digital ground.