Using Nozzles; Additional Usage Examples For House, Car And Garden - Parkside PLHLG 2000 A1 Originalbetriebsanleitung

Using nozzles

WARNING!
► Before changing the nozzle, you must ensure
that the hot air nozzle
avoid burns .
Cone nozzle – weed removal:
♦ Fit the cone nozzle
Filling nozzle – removing paints or varnish:
♦ Fit the fi lling nozzle
♦ The spatula shape of the nozzle is designed for
targeted hot-air delivery . Use it together with a
separate spatula to remove paint and coatings .
Flat nozzle – separating glued joints,
softening paints:
♦ Fit the fl at nozzle
♦ Avoid prolonged exposure to heat, as burned
paint can be very diffi cult to remove . Many
adhesives can be softened with heat . The
glued joints can be separated and excess glue
removed .
Reducer nozzle – welding plastics:
♦ Fit the reducer nozzle
nozzle .
♦ Use the reducer nozzle
tubing and fi lms .
■ 16 │ GB │ IE
has cooled down to
onto the hot air nozzle
onto the hot air nozzle
onto the hot air nozzle
onto the hot air
with heat-shrinkable
Additional usage examples for
house, car and garden
Defrosting water pipes:
NOTE
► Do not use on PVC piping .
► Water and gas pipes are often indistinguish-
able from the outside . If in doubt, always ask
.
a professional .
► Copper pipes are soldered and may not be
heated to above 200°C .
.
Releasing screwed joints:
♦ Heat screwed joints carefully with hot air and
the screws can then usually be removed easily .
Lighting charcoal:
WARNING!
.
► Do not use any lighter fl uid .
♦ Fit the barbecue nozzle
nozzle .
♦ Push the barbecue nozzle
When doing so, ensure that the last three bar-
becue nozzle holes remain free .
♦ As soon as the charcoal starts to glow, remove
the appliance from the charcoal .
De-waxing:
♦ Use the product – with suitable caution – to
remove residual wax from skis/snowboards or
candle holders .
onto the hot air
into the charcoal .
PLHLG 2000 A1