General Power Tool Safety Warnings - Parkside PLHLG 2000 A1 Originalbetriebsanleitung

General power tool
safety warnings
WARNING!
Read all safety warnings and all
►
instructions . Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury .
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cord-
less) power tool .
Do not expose power tools to rain
■
or wet conditions. Water entering
a power tool will increase the risk of
electric shock .
Do not abuse the cord. Never use
■
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock .
PLHLG 2000 A1
If operating a power tool in a
■
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock .
Do not use the power tool if the
■
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired .
Risk of burns caused by hot surfaces!
Do not touch!
Protect from rain and moisture!
Outlet temperature at the nozzle max .
650°C!
Unplug the appliance immediately if the
cable is damaged or has been cut .
General safety warnings for
the hot air blower
This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
GB │ IE │ 13 ■