Disposal And Recycling - EINHELL TC-PT 2500 S Originalbetriebsanleitung

Furthermore, we are not liable for any damages if
they result from improper repairs to the product.
Arrange for your customer service or an autho-
rized workshop to do the work. The same applies
to accessory parts.
8.2.1 Filling up with hydraulic oil
Check the oil level every six months. When fill-
ing up with hydraulic oil or replacing it, use only
hydraulic oil from the viscosity classes HLP 46 (-
20 °C - + 40°C) . A complete filling equals approx.
0.4 liters.
Important! To prevent environmental contami-
nation from escaping oil, use absorbent materials
(e.g. wood chips, dry rags) promptly to pick up
any oil spills. Take soiled maintenance material
and operating materials to an appropriate col-
lection point and dispose of the soiled material
correctly.
1. Lower the lifting forks as far as possible
2. Remove the oil filler plug and seal from the oil
tank.
3. Fill in hydraulic oil up to the brim
4. Reinsert the oil filler plug and seal into the oil
tank.
5. Vent the hydraulics system with several pum-
ping movements of the drawbar
8.3 Venting the hydraulic unit
If the lifting forks do not rise when the control
lever is in the lifting position, move the control
lever into the lower position and move the draw-
bar up and down again several times.
8.4 Lubricating the moving parts
Lubricate and grease the moving parts regularly.
8.5 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
Anl_TC_PT_2500_S_SPK7.indb 14 Anl_TC_PT_2500_S_SPK7.indb 14
GB
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
- 14 -
19.08.15 10:06 19.08.15 10:06