Read / Modify Watering Programmes; Reset - Parkside HG04678 Bedienungs- Und Sicherheitshinweise

The hour display on the
"Run Time" section will
flash on screen.
3. Set the hour of the watering
time and confirm with the SET)
button .
4
The minute display on the
"Run Time" section will
flash on screen.
4. Set the minute of the water-
ing time and confirm with the
SET button
Remark: If you want to quit
setting up the manually watering
mode, you can press the
OFF) button
7
gramming and go back to the
normal operation mode.
Remark: If the valve has been
opened manually and a pro-
grammed start of a watering pe-
riod overlaps the manual opening
period, the programmed starting
time is suppressed.
Example:
The valve is opened at 9:00
am manually, the opening
44 GB/IE
.
4
(ON/
to exit the pro-
period is 30 minutes. A program
with a start time between 9:00
am and 9:30 am will not be
undertaken in this case.
Read / modify
watering
programmes
1. In the normal operation mode
use the rotary switch to switch
between Programme 1‒6 to
read the data.
2. To modify the program data,
press the SET button
selecting the program in step
1. After modifying the program
data, the system will go back
to the normal operation mode.

Reset

Press the SET button
button at the same time for
6
approx. 3 seconds. The LCD dis-
play will show all symbols for ap-
prox. 1 second and the system
after
4
and
4